Non-volatile memory maintains programs indefinitely while timekeeper circuit keeps time during power outages. No batteries required.

Heavy-duty membrane keypad offers visual and audio function keys on the control panel.

Specialized controller power supervisor circuit prevents lockups due to power surges and brownouts.

Capable of resuming any program in progress upon power restoration.

Electronic overload protection with automatic reset. No fuses or circuit breakers.

18-gauge Jet Coat� cold rolled steel cabinet with a powder-coated finish suitable for wall or pedestal mounting.

Optional heavy-duty lightning and surge protection.

Comes with a limited 5-year warranty.

SE-B Series 18 Gauge Jet Coat� cold rolled steel,  expanded size field wiring cabinet,  off white power coat finish. Station terminal screws (36 station size shown)  Dimensions:  13" W x 17.5" H x 4.5" D

Sentar II Simplicity

Multiple displays provide a truly simple way of programming and information recall.

Quick station capability allowing simultaneous programming blocks of stations with the same run times.

Program review with manual stop and go scrolling.

Ability to start or stop a program allows for any program or station to run manually from 1 minute to 9 hours 59 minutes in 1-minute increments.

Manual rain shut-off switch.

SE-T Series 18 Gauge Jet Coat� cold rolled steel, expanded size field wiring cabinet, off white power coat finish. Heavy duty lightning and surge protection. Station terminal screws (36 station size shown) Dimensions:  13" W x 17.5" H x 4.5" D

Sentar II Water Management

Total flow control when connected to a Rain Master Flow Sensor.

Programmable flow limits and mainline break detection.

4 independent programs capable of running concurrently with 5 independent start times per program.

Programmable master valve for any of the 4 programs.

Programmable overlap protection allowing programs to be run in a "stacked� mode or concurrently.

Cycle and Soak feature to eliminate runoff and conserve water.

Programmable watering days based on a 7 day, skip by day, with up to 30 days between watering.

Programmable input for sensor devices allows for enabling of a device on a per program basis. Visual indicator for sensor device status indicates "sensor wet" or "sensor dry".

Program water budgeting from 0 to 300% in 1% increments.

Programmable security access code.

Programmable timer delay between stations allows the user to program a time delay from 1 second to 256 seconds (4 minutes 16 seconds) to allow slow-closing valves to completely shut off.

Programmable rain shut down allows the user to select the number of days the controller will stay off (in rain shut down mode) before it goes back into the automatic mode.

Built-in remote control ready.

Field wire fault detection identifies field wire shorts and automatically shuts down the offending station and moves on to the next station.

Audible alarm warns of field faults or station malfunction.

SE-ST Series Stainless steel,  expanded size field wiring cabinet. Heavy duty lightning and surge protection. Station terminal screws (36 station size shown) Dimensions:  13" W x 17.5" H x 4.5" D

LEDs provide instant identification of station activity, including watering days, station programming and field fault identification at the press of a button.

System check that runs each station from 1 to 9 minutes.

Detachable harness connectors that allow for quick access to front panel without disconnecting field wires.

Manually activated program cycle allows the user to run a program independent of its programmed start time and water days.

Manually activated station cycle allows the user to run a single station for a selected time.

Pro Max Compatibility

The tough, affordable Pro Max Remote is simple and easy to use.

Plug and play ready.

Advanced features when used with Sentar.

Permanent mount receiver option.